top of page

RotaBlast RB-Series
Portable Blasting Systems

RotaBlast™-RB1

RBP1-1.PNG

The RB1 blasting system is an 80-Litre (dry) dual induction abrasive blasting system (blast pot) - utilizing all the same blasting system design features as our RB2 machine (but for dry blasting only).
This machine is ideally suited to blast room installations where continuous production is desired to eliminate downtime.
The RB1 machine comes C/W with 10M  multi-core blast hose & Cobr™ blast nozzle with (10mm nozzle).

An upgraded design in comparison with a welded pressure vessel type blast pot, permitting 24/7 production in you blast room installation, or open blast cleaning operations.

Air compressor requirements: 70-180cfm - (depending on nozzle size)
COBRA™ NOZZLE - AIR CONSUMPTION CHART

Nozzle sizes available: 6, 8 or 10mm

RotaBlast™-RB2 

RBP2.PNG

The RB2 blasting system is an 80-Litre selectable wet/dry, dual induction, abrasive blasting system. The V2 machine is ideal for surface coating/blasting contractors where portability & wet/dry blasting is both required.
​
The RB2 machine comes C/W with 10M multi-core blast hose & Cobra™ blast nozzle with (10mm nozzle).
​
Air compressor requirements: 70-180cfm - (depending on nozzle size)
COBRA™ NOZZLE - AIR CONSUMPTION CHART
​
Nozzle sizes available: 6, 8 or 10mm
​
Cobra™ blast nozzle sizes are easily interchangeable without changing the entire nozzle assembly.
​

bottom of page